Khandesh College Education Society's
COLLEGE OF ENGINEERING AND MANAGEMENT, JALGAON
Affiliated to Dr. Babasaheb Ambedkar Technological University, Maharashtra;
Kavayitri Bahinabai Chaudhari North Maharashtra University, Jalgaon; MSBTE, Mumbai;
Approved by AICTE, New Delhi & Govt. of Maharashtra; NAAC Accredited
About Department
HOD Message
Vision & Mission
PEOs / POs / PSOs
Curriculum / Course Outcomes
Infrastructural Details
Human Resource Details
Achievements
Activities
Result Analysis
Aluminies
Photo Gallery
Research and Publications

Department of  Mechanical Engineering

Research   & Publications


1 Manoj D. Salunke

1) “Analysis of Injection Moulding Process”, International Journal of Engineering Research & Technology (IJERT), Vol. 1 Issue 8, October-2012 ISSN:2278-0181

2) “ Reduction of Short Shots by Optimizing Injection Moulding Process Parameters”, International Journal of Mechnical Engineering and Technology, Vol. 3, Issue 3, September- December 2012 pp 285-293 Impact Factor 3.5.

3) Paper Presented and Published on Effectiveness of ZDDP as an EP and AW additive to coconut oil. In International Conference on Engineering Research and Application at Godavari College of Engineering Jalgaon 02/03/2012

4) National Level paper presented on Vertual Manufacturing at Shri Sant Gadgebaba College of Engineering & Technology Bhusawal on 27/09/2011


2 Mahendra B. Pawar

1. A Review paper on Experimental and CFD analysis of forced convection Heat transfer over ribbed surfaces Published in BLBIJST INTERNATIONAL APRIL 2016

2. A Research paper on Experimental and CFD analysis of forced convection Heat transfer over ribbed surfaces Published in BLBIJST INTERNATIONAL APRIL 2016.

3. Investigation of electrochemically drilled hole. A parametric study for surface finish.ICAET in 2013

4. Investment to Indian services national conference in NMU jalgaon 2013

5. Sustainability in management through business ethics. 2014.


3 Darshan k. Thakur

1. Evaluation of carbon diffusion in H13 tool steel during heat treatment process in RAMES Publication.

2. Roof crush analysis Published in 2014

3. Rocket fuel pump Published in 2017


4 Manoj M. Nehete

1. “Design and Fabrication of PLC Based Conveyor System with Programmable Stations International Journal of Analytical, Experimental and Finite Element Analysis . ( e-ISSN 2394-5141 & p-ISSN 2394-5133)

2. “PLC Based 2D pneumatic palletizer Design & Manufacturing” Stations International Journal of Analytical, Experimental and Finite Element Analysis . ( e-ISSN 2394-5141 & p-ISSN 2394-5133)

3. Design and Fabrication of PLC Based Conveyor in MECHPGCON 2016 held during 22nd -23rd June 2016 at Dr. D.Y. Patil Institute of Engineering & Technology Pimpri Pune.

4 Performance of Air Cooled Condenser in various conditions : A Review in MAYFEB Journal of Mechanical Engineering Vol. 2 Pages 1-6.

5. A Review on “ Safety impact guard with PRV based Damper” A multidisciplinary national Conference. On 10th April 2019.

6. “A Review on Design & Development of Hybrid Aluminium Composite Shaft” ” A multidisciplinary national Conference on Management, Engineering & Science. On 10th April 2019.

7. “ Static analysis of I section boom of rotary jib crane for material handling system by finite element method” published in International Research journal of modernization in engineering technology and science volume 2 may 2020.


5 Hemant R. Nehete

1. “Leaf spring damping of vibration by composite material addition” published in IJMERT Issue-2 May 2017.

2. “Vibration analysis of leaf spring by different composite materials” published in IJMERT Issue-2 May 2017.

3. “Comparison of vibration analysis of steel and composite leaf spring” published in IJMERT Issue-3 Aud 2017.

4. “Vibration analysis of components leaf spring by finite element method “ Published in IJIRST Issue -8 Jan 2018.

5. “ A Review on mechanical performance of banana fiber reinforced epoxy composite” Published in IJEAST April 2020.

6. Stress analysis of composite plate with elliptical and rectangular cutouts by finite element method” Published in IRJMETS May 2020.

7. “ Static analysis of I section boom of rotary jib crane for material handling system by finite element method” published in International Research journal of modernization in engineering technology and science volume 2 may 2020.

8. A Review on “ Safety impact guard with PRV based Damper” A multidisciplinary national Conference. On 10th April 2019.

9 “ A Review on Design & Development of Hybrid Aluminium Composite Shaft” ” A multidisciplinary national Conference on Management, Engineering & Science. On 10th April 2019


6 Dhiraj S. Patil

1. The effect of cerium oxide nano particals as fuel additives in diesel and bio diesel blend Published in IJAEFEA March 2017.

2. Experimental investigation of effect of cerium oxide nanoparticals as a fuel additive in cottonseed biodiesel blends Published in MAYFEB 2018.

3. Stability of nanoparticles in biodiesel Published in ASME.

4. Review on spalling of 20 HI rolling mill roll. Published in MULTICON 2019

5. Performance of air cooled condenser in various conditions Published in MAYFEB 2019.


7 Vilas S. Jadhav

1. Experimental investigation of pool boiling & optimization of critical heat flux by using AI203 Nanofluid Published in IJESRT 25 MAY 2018.



Scroll To Top